AP Meeting Minutes 10/28`/2002

Attendees :  M. Blaskiewicz,A. Fedotov, H. Hahn,, Y. Y. Lee,   D. Raparia, G. Parzen,  ,  R. Talman, S. Tepikien, Nick Tsoups, , J. Wei,, W., S. Y. Zhang

Raparia shows the latest dipole measurements from Animesh

Five pair of magnet are sorted  and assigned based on 1.3 GeV transfer functions

Dipole # 12, 25 and 27 should me re-shim

Expected alignment error are discussed and decided as in this list

26Q40 poles are 5 to 15 mil shorter than the design Meng calculations

showed that due to 15 mil shorter pole width the is only 1.0e-6 change in 12 and 20 poles

so decided manufacture should match the pole widths.

Jackson showed the 30Q40 quadrupole measurement ,a d decided that

pole height should be reduce by 13 mil more o make b6 to zero (1), (2), (3)

Fedotov presented the summery of Diagnostics work shop

Lambetson optimization continues, overall length reduce by 20 cm

This figure shows the entrance of magnet and this exit of magnet

plot shown here the magnet field at the entrance of the magnet and this at the exit of magnet.