| SNS Project | RHIC | Brookhaven |Beyond Brookhaven |
The figure below shows a schematic of the accumulator ring and transport beam lines that are being designed and built by Brookhaven National Laboratory for the SNS Project. This equipment represents an integral part of the machine between the upstream linac (Berkeley, LANL and J-Lab) and the experimental area and target station (ANL and ORNL). Its prime purpose is to strip, accelerate and transport the particle beam from the linac to the target station.
When completed in 2006, the Spallation Neutron Source (SNS) will be the world's foremost neutron scattering science facility for conducting, chemistry, and structural biology. The design calls for a beam of negatively charged hydrogen (H-) ions to be generated and accelerated to an energy of one billion electron volts (GeV) using a linear accelerator (linac).
|The H- beam will then be transported to an accumulator ring, where it will be converted to protons by stripping away the electrons and bunched into a short (less than one microsecond ) pulse. Finally, the pulsed proton beam will be directed onto a liquid mercury target, where 60-Hz pulses of neutrons will be created through spallation reactions of the protons with the mercury nuclei. Inside the target building, the emerging neutrons will be slowed or moderated and channeled through beam-lines to instrumented experimental areas where users will carry out their research.|
Last Modified: 06/22/2009 03:43:47 PM By SNS Control Group@BNL
Report problems or send comments to SNS Web Development@BNL
Privacy and Security Notice