Oracle8 Application Developer's Guide
Release 8.0

A58241-01

Library

Product

Contents

Index

Prev Next

15
Dependencies Among Schema Objects

The definitions of certain schema objects, such as views and procedures, reference other schema objects, such as tables. Therefore, some schema objects are dependent upon the objects referenced in their definitions. This chapter discusses how to manage the dependencies among schema objects. Topics include the following:

Dependency Issues

When you create a stored procedure or function, Oracle verifies that the operations it performs are possible based on the schema objects accessed. For example, if a stored procedure contains a SELECT statement that selects columns from a table, Oracle verifies that the table exists and contains the specified columns. If the table is subsequently redefined so that one of its columns does not exist, the stored procedure may not work properly. For this reason, the stored procedure is said to depend on the table.

In cases such as this, Oracle automatically manages dependencies among schema objects. After a schema object is redefined, Oracle automatically recompiles all stored procedures and functions in your database that depend on the redefined object the next time they are called. This recompilation allows Oracle to verify that the procedures and functions can still execute properly based on the newly defined object.

Avoiding Runtime Recompilation

Runtime recompilation reduces runtime performance and the possible resulting runtime compilation errors can halt your applications. Follow these measures to avoid runtime recompilation:

There are several dependency issues to consider before dropping a procedure or package. Additional information about dependency issues is included in Oracle8 Concepts. Some guidelines for managing dependencies follow.

Use Packages Whenever Possible

Packages are the most effective way of preventing unnecessary dependency checks from being performed. The following example illustrates this benefit.

Assume this situation:

Even though the package's body is recompiled, the stand-alone procedure PROC that depends on the packaged procedure PACK_PROC is not invalidated, because the package's specification is not altered.

This technique is especially useful in distributed environments. If procedures are always part of a package, remote procedures that depend on packaged procedures are never invalidated unless a package specification is replaced or invalidated.

Whenever you recompile a procedure, you should consult with any other database administrators and application developers to identify any remote, dependent procedures and ensure that they are also recompiled. This eliminates recompilations at runtime and allows you to detect any compile-time errors that would otherwise be seen by the application user.

See Also:

"Manually Recompiling" on page 15-4 for more information.

 

The %TYPE and %ROWTYPE Attributes

The %TYPE attribute provides the datatype of a variable, constant, or column. This attribute is particularly useful when declaring a variable or procedure argument that refers to a column in a database table. The %ROWTYPE attribute is useful if you want to declare a variable to be a record that has the same structure as a row in a table or view, or a row that is returned by a fetch from a cursor.

When you declare a construct using %TYPE and %ROWTYPE, you do not need to know the datatype of a column or structure of a table. For example, the argument list of a procedure that inserts a row into the EMP table could be declared as

CREATE PROCEDURE hire_fire(emp_record emp%ROWTYPE) AS ... END;

If you change the column or table structure, the constructs defined on their datatypes or structure automatically change accordingly.

However, while one type of dependency is eliminated using %TYPE or %ROWTYPE, another is created. If you define a construct using object%TYPE or object%ROWTYPE, the construct depends on object. If object is altered, the constructs that depend on object are invalidated.

Remote Dependencies

Dependencies among PL/SQL library units (packages, stored procedures, and stored functions) can be handled either with timestamps or with signatures.

Manually Recompiling

Oracle dynamically recompiles an invalid view or PL/SQL program unit the next time it is used. Alternatively, you can force the compilation of an invalid view or program unit using the appropriate SQL command with the COMPILE parameter.

Forced compilations are most often used to test for errors when it is known that a dependent view or program unit is invalid, but is not currently being used; therefore, automatic recompilation would not otherwise occur until the view or program unit is executed.

Invalid dependent objects can be identified by querying the data dictionary views USER_OBJECTS, ALL_OBJECTS, and DBA_OBJECTS - see "Listing Dependency Management Information" on page 15-6 for examples.

Manually Recompiling Views

To recompile a view, use the ALTER VIEW command with the COMPILE parameter. The following statement recompiles the view EMP_DEPT contained in your schema:

ALTER VIEW emp_dept COMPILE;

Privileges Required to Recompile a View

To manually recompile a view, the view must be contained in your schema or you must have the ALTER ANY TABLE system privilege.

Manually Recompiling Procedures and Functions

To recompile a procedure or function (stand-alone), use the ALTER PROCEDURE or ALTER FUNCTION command with the COMPILE clause. For example, the following statement recompiles the stored procedure UPDATE_SALARY contained in your schema:

ALTER PROCEDURE update_salary COMPILE;

Manually Recompiling Packages

To recompile either a package body or both a package specification and body, use the ALTER PACKAGE command with the COMPILE parameter. For example, the following SQL*Plus statements recompile just the body and the body and specification of the package ACCT_MGMT_PACKAGE, respectively:

SQLPLUS> ALTER PACKAGE acct_mgmt_package COMPILE BODY;
SQLPLUS> ALTER PACKAGE acct_mgmt_package COMPILE PACKAGE;

All packages, procedures, and functions can be recompiled using the following syntax. The objects are compiled in dependency order, enabling each to be compiled only once.

SQLPLUS> EXECUTE DBMS_UTILITY.COMPILE_ALL;

Privileges Required to Recompile a Procedure or Package

You can manually recompile a procedure or package only if it is contained in your schema and you have the ALTER ANY PROCEDURE system privilege.

Manually Recompiling Triggers

An existing trigger, enabled or disabled, can be manually recompiled using the ALTER TRIGGER command. For example, to force the compilation of the trigger named REORDER, enter the following statement:

ALTER TRIGGER reorder COMPILE;

Privileges Required to Recompile a Trigger

To recompile a trigger, you must own the trigger or have the ALTER ANY TRIGGER system privilege.

Listing Dependency Management Information

The following data dictionary views list information about direct dependencies and dependency management:

Consider the following statements for Examples 1 and 2:

CREATE TABLE emp . . .;

CREATE PROCEDURE hire_emp BEGIN . . . END;

ALTER TABLE emp . . . ;

Example 1: Listing the Status of an Object

The ALL_OBJECTS data dictionary view lists information about all the objects available to the current user and the current status (that is, valid or invalid) of each object. For example, the following query lists the names, types, and current status of all objects available to the current user:

SELECT object_name, object_type, status
    FROM all_objects;

The following results might be returned:

OBJECT_NAME     OBJECT_TYPE     STATUS
--------------- --------------- ------------
EMP             TABLE           VALID
HIRE_EMP        PROCEDURE       INVALID

Example 2: Listing Dependencies

The DBA_DEPENDENCIES data dictionary view lists all dependent objects in the database and the objects on which they directly depend. For example, the following query lists all the dependent objects in JWARD's schema:

SELECT name, type, referenced_name, referenced_type
    FROM sys.dba_dependencies
    WHERE owner = 'JWARD';

If JWARD issued the example statements at the beginning of this section, the following results might be returned:

NAME        TYPE         REFERENCED_NAME     REFERENCED_TYPE
----------- ------------ ------------------- ---------------
HIRE_EMP    PROCEDURE    EMP                 TABLE

The Dependency Tracking Utility

The *_DEPENDENCIES data dictionary views provide information about only the direct dependencies of objects. As a supplement, you can use a special dependency tracking utility to list both direct and indirect dependents of an object.

To create the dependency tracking utility, you must run the SQL script UTLDTREE.SQL. The location of this file is operating system dependent. The UTLDTREE.SQL script creates the following schema objects:

Table DEPTREE_TEMPTAB

A temporary table used to store dependency information returned by the DEPTREE_FILL procedure.

Structure:  

object_id NUMBER

referenced_object_id NUMBER

nest_level NUMBER

seq# NUMBER  

View DEPTREE

A view that lists dependency information in the DEPTREE_TEMPTAB table. The parent object is listed with a NESTED_LEVEL of 0, and dependent objects are listed with a nested level greater than 0.

Column names:  

nested_level, object_type, owner, object_name, seq#  

View IDEPTREE

A view that lists dependency information in the DEPTREE_TEMPTAB table. Output is in a graphical format, with dependent objects indented from the objects on which they depend.

Column name:  

dependencies  

Sequence DEPTREE_SEQ

A sequence used to uniquely identify sets of dependency information stored in the DEPTREE_TEMPTAB.

Procedure DEPTREE_FILL

A procedure that first clears the DEPTREE_TEMPTAB table in the executor's schema, then fills the same table to indicate the objects that directly or indirectly depend on (that is, reference) the specified object. All objects that recursively reference the specified object are listed, assuming the user has permission to know of their existence.

Syntax:  

DEPTREE_FILL(object_type CHAR, object_owner CHAR, object_name CHAR)  

Using UTLDTREE While Connected as INTERNAL

If you run the UTLDTREE.SQL script and use the utility while connected as INTERNAL, dependency information is gathered and displayed not only for dependent objects, but also for dependent cursors (shared SQL areas).

Example

These SQL statements show how the UTLDTREE utility can be used to track dependencies of an object. Assume the following SQL statements:

CONNECT scott/tiger;
CREATE TABLE scott.emp ( .... );
CREATE SEQUENCE scott.emp_sequence;
CREATE VIEW scott.sales_employees AS
   SELECT * FROM scott.emp WHERE deptno = 10;
CREATE PROCEDURE scott.hire_salesperson (name VARCHAR2,
   job VARCHAR2, mgr NUMBER, hiredate DATE, sal NUMBER,
   comm NUMBER)
IS
BEGIN
   INSERT INTO scott.sales_employees
      VALUES (scott.emp_sequence.NEXTVAL, name, job, mgr,
         hiredate, sal, comm, 10;
END;
CREATE PROCEDURE scott.fire_salesperson (emp_id NUMBER) IS
BEGIN
   DELETE FROM scott.sales_employees WHERE empno = emp_id;
END;
SELECT * FROM scott.emp;
SELECT * FROM scott.sales_employees;
EXECUTE scott.hire_salesperson ('ARNALL', 'MANAGER', 7839, /
                                 SYSDATE, 1000, 500);
EXECUTE scott.fire_salesperson (7934);

Assume that before SCOTT alters the EMP table, he would like to know all the dependent objects that will be invalidated as a result of altering the EMP table. The following procedure execution fills the DEPTREE_TEMPTAB table with dependency information regarding the EMP table (executed using Enterprise Manager):

EXECUTE deptree_fill('TABLE', 'SCOTT', 'EMP');

The following two queries show the previously collected dependency information for the EMP table:

SELECT * FROM deptree;
NESTED_LEV TYPE       OWNER          NAME               SEQ#
---------- ---------- -------------- ------------------ ----
         0 TABLE      SCOTT          EMP                   0
         1 VIEW       SCOTT          SALES_EMPLOYEES       1
         2 PROCEDURE  SCOTT          FIRE_SALESPERSON      2
         2 PROCEDURE  SCOTT          HIRE_SALESPERSON      3
SELECT * FROM ideptree;
DEPENDENCIES
----------------------------------------
TABLE SCOTT.EMP
VIEW SCOTT.SALES_EMPLOYEES
PROCEDURE SCOTT.FIRE_SALESPERSON
PROCEDURE SCOTT.HIRE_SALESPERSON

Alternatively, you can reveal all of the cursors that depend on the EMP table (dependent shared SQL areas currently in the shared pool) using the UTLDTREE utility. After connecting as INTERNAL and collecting dependency information for the table SCOTT.EMP, issue the following two queries:

SELECT * FROM deptree;
NESTED_LEV TYPE   OWNER    NAME                         SEQ#
---------- ------ -------- ---------------------------- ----
         0 TABLE  SCOTT    EMP                             0
         1 CURSOR <shared> "select * from scott.emp      0.5
         2 CURSOR <shared> "select * from scott.sa. . .  7.5
         3 CURSOR <shared> "BEGIN hire_salesperson. . .  9.5
         3 CURSOR <shared> "BEGIN fire_salesperson. . .  8.5
SELECT * FROM ideptree;
DEPENDENCIES
------------------------------------------------------------
TABLE STEVE.EMP
   CURSOR <shared>."select * from scott.emp"
   CURSOR <shared>."select * from scott.sales_employee"
   CURSOR <shared>."BEGIN  hire_salesperson ('ARN. . .
   CURSOR <shared>."BEGIN  fire_salesperson (7934) END"




Prev

Next
Oracle
Copyright © 1997 Oracle Corporation.

All Rights Reserved.

Library

Product

Contents

Index